Nothing beats living or working in a safe clean home or office. However, even when a room looks spot on, the air quality might not be as good; dust and dirt particles floating through the air can be so small that you can’t actually see them. Our air purifier with convenient timer offers the perfect solution.
This air purifier works with a HEPA filter, removing up to 99.99% Equililant to FFP3* of all particles of 0.3 micrometre or bigger, which includes bacteria, viruses, pollen and dust mite. This means less dust an you will also suffer much less from your allergies. Additionally, this air purifier also removes odours and bad smells.
The purifier also features an onboard dust sensor which indicates the air quality so you know which one (of four) fan speeds to select.
Or press auto mode for this device to select the appropriate setting.
There’s also a quiet night mode, ensuring clean, pure air for a good night’s rest. This makes this air purifier perfect for your bedroom, baby room or basically any room up till 45 m2.
• Touch control panel with blue LED indication • Dust sensor - measures and indicates the air quality • 4-level fan speed and auto mode, based on dust sensor outcome • Quiet night mode - for a good night's rest in clear air • Works with HEPA filter - removes 99.99% of all dust and dirt particles ≥ 0.3 um • Filter indicator - to replace the HEPA filter on time • CADR: smoke 360 m3/h and a capacity of 45 m2 • 4 wheels - easy to move around • Active carbon filter - removes odours • Timer - set the purifier to switch off after 2, 4 or 8 hours • Filter indicator - to replace the HEPA filter on time • Filters with antibacterial coating
*EN149: 2001 European Standard information
Respiratory protective devices. Filtering half masks to protect against particles.
A filtering half mask is one in which the facepiece consists entirely or substantially of filter material or comprises a facepiece in which
the main filter(s) from an inseparable part of the device.
Respirators which meet the requirements of EN149: 2001 are designed to protect against solids, water based aerosols and oil based
aerosols. There are three classes of protection detailed in EN149: 2001 – FFP1, FFP2 & FFP3 and filtering facepieces are classified
according to filter efficiency.
FFP1 (80% Filter efficiency)
Suitable for protection from non‐toxic contaminants in concentrations up to 4 x OEL or 4 x APF
FFP2 (94% Filter efficiency)
Suitable for protection from low to average toxicity contaminants in concentrations up to 12 x OEL or 10 x APF
FFP3 (99% Filter efficiency)
Suitable for protection from toxicity contaminants in concentrations up to 50 x OEL or 20 x APF
OEL = Occupational Exposure Limit APF = Assigned Protection Factor
Class Separation ability (at 95 L/min airflow) Allow leakage between mask and face
FFP1 Filter separates 80% af airborne particles < 22%
FFP2 Filter separates 94% af airborne particles < 8%
FFP3 Filter separates 99% af airborne particles < 2%
Disposable Mask Protection Levels
FFP1 Particles larger than 5 microns
Dusts, Fumes, Aqueous mists, Oils based mists
FFP2 Particles between 2&5 microns
Fine dusts, Fibers, Aqueous mists, Oils based mists
FFP3 Particles less than 2 microns
Very fine dusts, Fibers, Aqueous mists, Oils based mists
The year reference in addition to the standard number, EN149: 2001 is to be printed on to the respirator. Note: products meeting the
previous version of the standard are marked EN149 only.
FFP3 respirators to be used for more than one shift must now not only have cleanable face seals, but must also have passed the
Dolomite test for clogging – indicate by the letter “D” printed on the mask, previously only required on FFP1 & FFP2 respirators.
Activated Carbon: Layers of carbon designed to offer relief from the irritation of low level of specific gases and vapors